How do you build a hammock post?

STEP 1: LOCATION. Start off by choosing a location to build your relaxation station.
STEP 2: LENGTH. The hammock posts should be 15 feet apart in the ground.
STEP 3: DEPTH & WIDTH. Dig the hole with a post-hole digger and shovel.
STEP 4: SET POSTS. Use a level to ensure each post is square.
STEP 5: DRILL & TWIST.

How deep should a hammock post be?

Post holes should be at least three feet (0.9 m) deep and carefully back-filled with concrete. Remove air pockets. While concrete is fresh, posts may be tilted slightly away from the direction of the hammock. Wait at least 24 hours before hanging your hammock.

What can I use for a hammock post?

Hammock Post Installation Trees should be a minimum of 12″ in diameter, and both posts and trees should be a hardwood, not soft. How to Install Posts: Posts should be 4″ x 4″ or larger, and free of cracks or rot. Drill holes and pre install the hooks on the post before putting in the ground.

What size posts do I need for a hammock?

It is recommended that the posts be 4″ x 6″ or 6″ x 6″ in size and about 8′ long. These should be available from your local lumber yard. For a large hammock you should dig the post holes at least 15′ apart and for a small hammock they should be at least 13′ apart.

Can a fence post hold a hammock?

If you do not have a hammock stand, you can hang your hammock between any 2 solid points, including fence posts, trees, garage, house, 4” x 4” x 8′ post, etc., using heavy duty screw hooks (eye screws), tree straps (available at the store), chain or high test marine nylon rope for larger distances.

Can a fence post support a hammock?

How much concrete do I need for a hammock post?

Use two 25 lb bags of Quikrete in each hammock post hole. Follow the manufacturers directions and layer the water and the concrete mixture. I waited two days for the concrete to cure in the hammock post holes and then back filled the holes with dirt.